SWP MIG 420S Welder With Separate Wire Feeder
The SWP MIG 420S + WF400 is a robust three phase machine ideally suited to medium and heavy fabrication and requires only a 20A fuse.
Its full size cabinet can accept full size gas cylinders and its large diameter wheels means it can be moved from job to job with little risk of toppling.
The WF400 wire feeder features SWPs renowned all-geared drive system which will reduces the risk of wire slip making welds uniform.
With its 5 metre interconnection and 4 metre welding torch you have a large working radius of 9 metres. The unit is also
suitable for use with spool-on gun and push-pull gun which increases the working radius up to 13 metres.
The ability to take larger diameter wire than lower power units in the range means it can also weld thicker
plate, and its 21 switch settings allows for fine tuning of the output power.
• Copper wound transformer and choke
• Forced air fan cooling
• Overload warning indicator
• Heavy duty front and rear wheels
• All geared 4-roll metal cast feed system
• Cylinder support chain
• Infinitely variable wire speed
• Spot weld timer
• Burnback control
• Stitch welding
• Soft arc technology
• Digital volt and amp meter
• M36-3 torch and 2068 regulator included
Download spec sheet.MIG 420S
|SWP MIG 420S Technical Data
|Output current MMA
|40 – 420A
|Duty cycle at 40 deg ambient temperature
|Mains voltage (tolerances)
|3 x 415 V
|Mains fuse (slow-blow)
|1 x 20 A